José Luis Carvalho Martins Alves

About

University of Minho

Work

Universidade do Minho Escola de Engenharia

|

Associate Professor with Habillitation

Portugal

→

Education

Universidade do Minho

Portugal
→
PhD

Publications

Optimization of the phenomenological constitutive models parameters using genetic algorithms

journal-article

Shielding AZ91D-1%Ca from corrosion through ultrasound melt treatment: A study for stent design

Journal of Magnesium and Alloys

journal-article

Assessing the Accuracy of Different Remapping Methods in Adaptive Mesh Refinement

Key Engineering Materials

journal-article

Assessing the Accuracy of Different Remapping Methods in Adaptive Mesh Refinement

Key Engineering Materials

journal-article

Influence of the Anisotropic Behavior on Equibiaxial Paths

Key Engineering Materials

journal-article

Influence of the Anisotropic Behavior on Equibiaxial Paths

Key Engineering Materials

journal-article

Non-Uniform Effect of the Contact Conditions on the Earing Profile in Cylindrical Cups of Anisotropic Materials

Key Engineering Materials

journal-article

Non-Uniform Effect of the Contact Conditions on the Earing Profile in Cylindrical Cups of Anisotropic Materials

Key Engineering Materials

journal-article

On the Effect of the Tension-Compression Ratio on Forming of Isotropic Materials

Key Engineering Materials

journal-article

On the Effect of the Tension-Compression Ratio on Forming of Isotropic Materials

Key Engineering Materials

journal-article

Investigating the plastic anisotropy and hardening behavior of a commercial Zn–Cu–Ti alloy: Experimental & modeling approach

Mechanics of Materials

journal-article

Investigating the plastic anisotropy and hardening behavior of a commercial Zn–Cu–Ti alloy: Experimental & modeling approach

Mechanics of Materials

journal-article

Investigating the plastic anisotropy and hardening behavior of a commercial Zn-Cu-Ti alloy: Experimental & modeling approach

Mechanics of Materials

journal-article

Numerical implementation of an osmo-poro-visco-hyperelastic finite element solver: application to the intervertebral disc

Computer Methods in Biomechanics and Biomedical Engineering

journal-article

Numerical implementation of an osmo-poro-visco-hyperelastic finite element solver: application to the intervertebral disc

Computer Methods in Biomechanics and Biomedical Engineering

journal-article

Numerical implementation of an osmo-poro-visco-hyperelastic finite element solver: application to the intervertebral disc

Computer Methods in Biomechanics and Biomedical Engineering

journal-article

Influence of the orthotropic behaviour on defects prediction in cup drawing, reverse redrawing and expansion

IOP Conference Series: Materials Science and Engineering

journal-article

Influence of the orthotropic behaviour on defects prediction in cup drawing, reverse redrawing and expansion

IOP Conference Series: Materials Science and Engineering

journal-article

On the effect of the ratio between the yield stresses in shear and in uniaxial tension on forming of isotropic materials

Mechanics Research Communications

journal-article

On the effect of the ratio between the yield stresses in shear and in uniaxial tension on forming of isotropic materials

Mechanics Research Communications

journal-article

Study on the influence of the strain rate sensitivity on the springback of the AA5086 alloy under warm forming conditions

IOP Conference Series: Materials Science and Engineering

journal-article

Study on the influence of the strain rate sensitivity on the springback of the AA5086 alloy under warm forming conditions

IOP Conference Series: Materials Science and Engineering

journal-article

Ultrasonic Treatment as the Route for Grain Refinement of Mg-Al Alloys: A Systematic Review

Metals

journal-article

Ultrasonic Treatment as the Route for Grain Refinement of Mg-Al Alloys: A Systematic Review

Metals

journal-article

Constitutive parameter identification of CB2001 yield function and its experimental verification using tube hydroforming tests

International Journal of Mechanical Sciences

journal-article

Constitutive parameter identification of CB2001 yield function and its experimental verification using tube hydroforming tests

International Journal of Mechanical Sciences

journal-article

Effect of bio-functional MAO layers on the electrochemical behaviour of highly porous Ti

Surface and Coatings Technology

journal-article

Effect of bio-functional MAO layers on the electrochemical behaviour of highly porous Ti

Surface and Coatings Technology

journal-article

Experimental and Numerical Analysis of the Heat Generated By Plastic Deformation in Quasi-static Uniaxial Tensile Tests

Mechanics of Materials

journal-article

Experimental and Numerical Analysis of the Heat Generated By Plastic Deformation in Quasi-static Uniaxial Tensile Tests

Mechanics of Materials

journal-article

Heat generation when forming AHSS: experimental and numerical analysis of tensile and draw-bead tests

IOP Conference Series: Materials Science and Engineering

journal-article

Heat generation when forming AHSS: experimental and numerical analysis of tensile and draw-bead tests

IOP Conference Series: Materials Science and Engineering

journal-article

In silico evaluation of the stress fields on the cortical bone surrounding dental implants: Comparing root-analogue and screwed implants

Journal of the Mechanical Behavior of Biomedical Materials

journal-article

In silico evaluation of the stress fields on the cortical bone surrounding dental implants: Comparing root-analogue and screwed implants

Journal of the Mechanical Behavior of Biomedical Materials

journal-article

Influence of the Adopted Balloon Modeling Strategies in the Stent Deployment Procedure: AnIn-SilicoAnalysis

Cardiovascular Engineering and Technology

journal-article

Influence of the Adopted Balloon Modeling Strategies in the Stent Deployment Procedure: AnIn-SilicoAnalysis

Cardiovascular Engineering and Technology

journal-article

Micro-CT based finite element modelling and experimental characterization of the compressive mechanical properties of 3-D zirconia scaffolds for bone tissue engineering

Journal of the Mechanical Behavior of Biomedical Materials

journal-article

Micro-CT based finite element modelling and experimental characterization of the compressive mechanical properties of 3-D zirconia scaffolds for bone tissue engineering

Journal of the Mechanical Behavior of Biomedical Materials

journal-article

On the Computational Biomechanics of the Intervertebral Disc

Classification in Bioapps: Automation of Decision Making

journal-article

On the Computational Biomechanics of the Intervertebral Disc

Classification in Bioapps: Automation of Decision Making

journal-article

Study on the influence of the yield surface shape in the hole expansion test

IOP Conference Series: Materials Science and Engineering

journal-article

Study on the influence of the yield surface shape in the hole expansion test

IOP Conference Series: Materials Science and Engineering

journal-article

Numerical Study on the Formability of Metallic Bipolar Plates for Proton Exchange Membrane (PEM) Fuel Cells

Metals

journal-article

Numerical Study on the Formability of Metallic Bipolar Plates for Proton Exchange Membrane (PEM) Fuel Cells

Metals

journal-article

Numerical Study on the Formability of Metallic Bipolar Plates for Proton Exchange Membrane (PEM) Fuel Cells

Metals

journal-article

On the impact of modelling tension-compression asymmetry on earing and thickness predictions

Advances in Materials and Processing Technologies

journal-article

On the impact of modelling tension-compression asymmetry on earing and thickness predictions

Advances in Materials and Processing Technologies

journal-article

On the impact of modelling tension-compression asymmetry on earing and thickness predictions

Advances in Materials and Processing Technologies

journal-article

Thermomechanical analysis of the draw bead test

Advances in Materials and Processing Technologies

journal-article

Thermomechanical analysis of the draw bead test

Advances in Materials and Processing Technologies

journal-article

Thermomechanical analysis of the draw bead test

Advances in Materials and Processing Technologies

journal-article

Effect of the ultrasonic melt treatment on the deployment outcomes of a magnesium stent manufactured by microcasting: a finite element analysis

IEEE Portuguese Meeting in Bioengineering (ENBENG)

conference-paper

Effect of the ultrasonic melt treatment on the deployment outcomes of a magnesium stent manufactured by microcasting: a finite element analysis

conference-paper

Influence of the Characteristics of the 3D FE Mesh on the Evolution of Variables Used to Characterize the Stress State

AIP Conference Proceedings

conference-paper

Influence of the Characteristics of the 3D FE Mesh on the Evolution of Variables Used to Characterize the Stress State

conference-paper

Modelling strategies and FEM approaches to characterize micro-sandwich sheets with unknown core properties

International Journal of Material Forming

journal-article

Modelling strategies and FEM approaches to characterize micro-sandwich sheets with unknown core properties

International Journal of Material Forming

journal-article

The Role of Viscoelasticity in the Mechanical Modelling of Rubbers

AIP Conference Proceedings

conference-paper

The Role of Viscoelasticity in the Mechanical Modelling of Rubbers

conference-paper

Study on the effect of tension-compression asymmetry on the cylindrical cup forming of an AA2090-T3 alloy

International Journal of Solids and Structures

journal-article

Study on the effect of tension-compression asymmetry on the cylindrical cup forming of an AA2090-T3 alloy

International Journal of Solids and Structures

journal-article

Study on the effect of tension-compression asymmetry on the cylindrical cup forming of an AA2090-T3 alloy

International Journal of Solids and Structures

journal-article

Thermo-mechanical finite element analysis of the AA5086 alloy under warm forming conditions

International Journal of Solids and Structures

journal-article

Thermo-mechanical finite element analysis of the AA5086 alloy under warm forming conditions

International Journal of Solids and Structures

journal-article

Numerical study of springback using the split-ring test: influence of the clearance between the die and the punch

International Journal of Material Forming

journal-article

Shape and functional optimization of biodegradable magnesium stents for manufacturing by ultrasonic-microcasting technique

International Journal on Interactive Design and Manufacturing

journal-article

Shape and functional optimization of biodegradable magnesium stents for manufacturing by ultrasonic-microcasting technique

International Journal on Interactive Design and Manufacturing

journal-article

Study of the frictional contact conditions in the hole expansion test

Journal of Physics: Conference Series

journal-article

Study of the frictional contact conditions in the hole expansion test

Journal of Physics: Conference Series

journal-article

Study on the influence of orthotropy and tension-compression asymmetry of metal sheets in springback and formability predictions

Journal of Physics: Conference Series

journal-article

Study on the influence of orthotropy and tension-compression asymmetry of metal sheets in springback and formability predictions

Journal of Physics: Conference Series

journal-article

Temperature analysis during the drawing of an aluminum cylindrical cup

Journal of Physics: Conference Series

journal-article

Temperature analysis during the drawing of an aluminum cylindrical cup

Journal of Physics: Conference Series

journal-article

Numerical study of springback using the split-ring test: influence of the clearance between the die and the punch

International Journal of Material Forming

journal-article

Comprehensive benchmark study of commercial sheet metal forming simulation softwares used in the automotive industry

International Journal of Material Forming

journal-article

DEffects of dynamic compression on cells in tissue engineering of mandibular condylar cartilage

Biodental Engineering IV

journal-article

DEffects of dynamic compression on cells in tissue engineering of mandibular condylar cartilage

Biodental Engineering IV

journal-article

Finite element analysis of peri-implant bone volume affected by stresses around Morse taper implants: effects of implant positioning to the bone crest

Computer Methods in Biomechanics and Biomedical Engineering

journal-article

Finite element analysis of peri-implant bone volume affected by stresses around Morse taper implants: effects of implant positioning to the bone crest

Computer Methods in Biomechanics and Biomedical Engineering

journal-article

Incremental volumetric and Dual Kriging remapping methods

Finite Elements in Analysis and Design

journal-article

Comprehensive benchmark study of commercial sheet metal forming simulation softwares used in the automotive industry

International Journal of Material Forming

journal-article

Incremental volumetric and Dual Kriging remapping methods

Finite Elements in Analysis and Design

journal-article

Influence of porosity and cell density on tissue engineering of mandibular condylar cartilage

Biodental Engineering IV

journal-article

Influence of porosity and cell density on tissue engineering of mandibular condylar cartilage

Biodental Engineering IV

journal-article

Thermo-mechanical finite element analysis of the AA5086 alloy under warm forming conditions

International Journal of Solids and Structures

journal-article

Influence of boundary conditions on the prediction of springback and wrinkling in sheet metal forming

International Journal of Mechanical Sciences

journal-article

Influence of boundary conditions on the prediction of springback and wrinkling in sheet metal forming

International Journal of Mechanical Sciences

journal-article

Structural monitoring and modeling of the mechanical deformation of three-dimensional printed poly(epsilon-caprolactone) scaffolds

Biofabrication

journal-article

Structural monitoring and modeling of the mechanical deformation of three-dimensional printed poly(epsilon-caprolactone) scaffolds

Biofabrication

journal-article

The role of tension-compression asymmetry of the plastic flow on ductility and damage accumulation of porous polycrystals

Ciência & Tecnologia dos Materiais

journal-article

The role of tension-compression asymmetry of the plastic flow on ductility and damage accumulation of porous polycrystals

Ciência & Tecnologia dos Materiais

journal-article

A 3D finite element model to predict the arcade-like collagen structure in a layered PCL scaffold for cartilage tissue engineering

Computer Methods in Biomechanics and Biomedical Engineering

journal-article

A 3D finite element model to predict the arcade-like collagen structure in a layered PCL scaffold for cartilage tissue engineering

Computer Methods in Biomechanics and Biomedical Engineering

journal-article

A new staggered algorithm for thermomechanical coupled problems

International Journal of Solids and Structures

journal-article

A new staggered algorithm for thermomechanical coupled problems

International Journal of Solids and Structures

journal-article

Numerical and experimental analysis of wrinkling during the cup drawing of an AA5042 aluminium alloy

International Journal of Material Forming

journal-article

Comparison of lenses' thermal expansion formulation in Zemax versus ANSYS with SigFit post processing

Proceedings of SPIE - The International Society for Optical Engineering

conference-paper

Comparison of lenses' thermal expansion formulation in Zemax versus ANSYS with SigFit post processing

conference-paper

Finite Element Analysis of Stent expansion: Influence of Stent Geometry on Performance Parameters

IEEE Portuguese Meeting on Bioengineering (ENBENG)

conference-paper

Finite Element Analysis of Stent expansion: Influence of Stent Geometry on Performance Parameters

conference-paper

Finite element analysis of stress extent at peri-implant bone surrounding external hexagon or Morse taper implants

Journal of the Mechanical Behavior of Biomedical Materials

journal-article

Finite element analysis of stress extent at peri-implant bone surrounding external hexagon or Morse taper implants

Journal of the Mechanical Behavior of Biomedical Materials

journal-article

Semi-implicit finite strain constitutive integration and mixed strain/stress control based on intermediate configurations

Engineering Structures

journal-article

Tension-compression asymmetry modelling: strategies for anisotropy parameters identification

MATEC Web of Conferences

journal-article

Tension-compression asymmetry modelling: strategies for anisotropy parameters identification

MATEC Web of Conferences

journal-article

The Role of Evolutive Elastic Properties in the Performance of a Sheet Formed Spring Applied in Multimedia Car Industry

Journal of Physics: Conference Series

journal-article

The Role of Evolutive Elastic Properties in the Performance of a Sheet Formed Spring Applied in Multimedia Car Industry

Journal of Physics: Conference Series

journal-article

The Role of Evolutive Elastic Properties in the Performance of a Sheet Formed Spring Applied in Multimedia Car Industry

MATEC Web of Conferences

journal-article

The Role of Evolutive Elastic Properties in the Performance of a Sheet Formed Spring Applied in Multimedia Car Industry

MATEC Web of Conferences

journal-article

Unusual plastic deformation and damage features in titanium: Experimental tests and constitutive modeling

Journal of the Mechanics and Physics of Solids

journal-article

Unusual plastic deformation and damage features in titanium: Experimental tests and constitutive modeling

Journal of the Mechanics and Physics of Solids

journal-article

Unusual plastic deformation and damage features in titanium: Experimental tests and constitutive modeling

Journal of the Mechanics and Physics of Solids

journal-article

Semi-implicit finite strain constitutive integration and mixed strain/stress control based on intermediate configurations

Engineering Structures

journal-article

Prediction of wrinkling and springback in sheet metal forming

MATEC Web of Conferences

journal-article

Prediction of wrinkling and springback in sheet metal forming

MATEC Web of Conferences

journal-article

Numerical analysis on the elastic deformation of the tools in sheet metal forming processes

International Journal of Solids and Structures

journal-article

Numerical analysis on the elastic deformation of the tools in sheet metal forming processes

International Journal of Solids and Structures

journal-article

Numerical analysis on the elastic deformation of the tools in sheet metal forming processes

International Journal of Solids and Structures

journal-article

A contact smoothing method for arbitrary surface meshes using Nagata patches

Computer Methods in Applied Mechanics and Engineering

journal-article

A contact smoothing method for arbitrary surface meshes using Nagata patches

Computer Methods in Applied Mechanics and Engineering

journal-article

A contact smoothing method for arbitrary surface meshes using Nagata patches

Computer Methods in Applied Mechanics and Engineering

journal-article

A contact smoothing method for arbitrary surface meshes using Nagata patches

Computer Methods in Applied Mechanics and Engineering

journal-article

A staggered coupling strategy for the finite element analysis of warm deep drawing process

Journal of Physics: Conference Series

journal-article

A staggered coupling strategy for the finite element analysis of warm deep drawing process

Journal of Physics: Conference Series

journal-article

Automatic correction of the time step in implicit simulations of thermomechanical problems

MATEC Web of Conferences

journal-article

Automatic correction of the time step in implicit simulations of thermomechanical problems

MATEC Web of Conferences

journal-article

DD3MAT-a code for yield criteria anisotropy parameters identification

Journal of Physics: Conference Series

journal-article

DD3MAT-a code for yield criteria anisotropy parameters identification

Journal of Physics: Conference Series

journal-article

Evaluation of strain and stress states in the single point incremental forming process

International Journal of Advanced Manufacturing Technology

journal-article

Evaluation of strain and stress states in the single point incremental forming process

International Journal of Advanced Manufacturing Technology

journal-article

Evaluation of strain and stress states in the single point incremental forming process

The International Journal of Advanced Manufacturing Technology

journal-article

Homogenization on Multi-Materials' Elements: Application to Printed Circuit Boards and Warpage Analysis

MATEC Web of Conferences

journal-article

Homogenization on Multi-Materials' Elements: Application to Printed Circuit Boards and Warpage Analysis

MATEC Web of Conferences

journal-article

Hybrix: Experimental characterization of a micro-sandwich sheet

Journal of Materials Processing Technology

journal-article

Hybrix: Experimental characterization of a micro-sandwich sheet

Journal of Materials Processing Technology

journal-article

Hybrix: Experimental characterization of a micro-sandwich sheet

Journal of Materials Processing Technology

journal-article

Low pressure sand casting of ultrasonically degassed AlSi7Mg0.3 alloy: Modelling and experimental validation of mould filling

Materials and Design

journal-article

Low pressure sand casting of ultrasonically degassed AlSi7Mg0.3 alloy: Modelling and experimental validation of mould filling

Materials and Design

journal-article

Low pressure sand casting of ultrasonically degassed AlSi7Mg0.3 alloy: Modelling and experimental validation of mould filling

Materials & Design

journal-article

Modeling of tension-compression asymmetry and orthotropy on metallic materials: Numerical implementation and validation

International Journal of Mechanical Sciences

journal-article

Modeling of tension-compression asymmetry and orthotropy on metallic materials: Numerical implementation and validation

International Journal of Mechanical Sciences

journal-article

Modeling of tension-compression asymmetry and orthotropy on metallic materials: Numerical implementation and validation

International Journal of Mechanical Sciences

journal-article

Numerical analysis of different heating systems for warm sheet metal forming

International Journal of Advanced Manufacturing Technology

journal-article

Numerical analysis of different heating systems for warm sheet metal forming

International Journal of Advanced Manufacturing Technology

journal-article

Numerical analysis of different heating systems for warm sheet metal forming

The International Journal of Advanced Manufacturing Technology

journal-article

Numerical modeling of the thermal contact in metal forming processes

International Journal of Advanced Manufacturing Technology

journal-article

Numerical modeling of the thermal contact in metal forming processes

International Journal of Advanced Manufacturing Technology

journal-article

Numerical modeling of the thermal contact in metal forming processes

The International Journal of Advanced Manufacturing Technology

journal-article

Remapping algorithms: application to trimming operations in sheet metal forming

Journal of Physics: Conference Series

journal-article

Remapping algorithms: application to trimming operations in sheet metal forming

Journal of Physics: Conference Series

journal-article

Semi-implicit finite strain constitutive integration and mixed strain/stress control based on intermediate configurations

Engineering Structures

journal-article

Influence of the characteristics of the experimental data set used to identify anisotropy parameters

Simulation Modelling Practice and Theory

journal-article

A new level-set-based protocol for accurate bone segmentation from ct imaging

IEEE Access

journal-article

A new level-set-based protocol for accurate bone segmentation from ct imaging

IEEE Access

journal-article

A New Level-Set-Based Protocol for Accurate Bone Segmentation From CT Imaging

IEEE Access

journal-article

Influence of the characteristics of the experimental data set used to identify anisotropy parameters

Simulation Modelling Practice and Theory

journal-article

Influence of the characteristics of the experimental data set used to identify anisotropy parameters

Simulation Modelling Practice and Theory

journal-article

Mechanical characterization and constitutive parameter identification of anisotropic tubular materials for hydroforming applications

International Journal of Mechanical Sciences

journal-article

Mechanical characterization and constitutive parameter identification of anisotropic tubular materials for hydroforming applications

International Journal of Mechanical Sciences

journal-article

Mechanical characterization and constitutive parameter identification of anisotropic tubular materials for hydroforming applications

International Journal of Mechanical Sciences

journal-article

Micromechanical study of the dilatational response of porous solids with pressure-insensitive matrix displaying tension-compression asymmetry

European Journal of Mechanics, A/Solids

journal-article

Micromechanical study of the dilatational response of porous solids with pressure-insensitive matrix displaying tension-compression asymmetry

European Journal of Mechanics - A/Solids

journal-article

Micromechanical study of the dilatational response of porous solids with pressure-insensitive matrix displaying tension-compression asymmetry

European Journal of Mechanics, A/Solids

journal-article

Micromechanical study of the dilatational response of porous solids with pressure-insensitive matrix displaying tension-compression asymmetry

European Journal of Mechanics - A/Solids

journal-article

Numerical and experimental analysis of wrinkling during the cup drawing of an AA5042 aluminium alloy

International Journal of Material Forming

journal-article

Numerical and experimental analysis of wrinkling during the cup drawing of an AA5042 aluminium alloy

International Journal of Material Forming

journal-article

The feasibility of a custom-made endoprosthesis in mandibular reconstruction: Implant design and finite element analysis

Journal of Cranio-Maxillofacial Surgery

journal-article

The feasibility of a custom-made endoprosthesis in mandibular reconstruction: Implant design and finite element analysis

Journal of Cranio-Maxillofacial Surgery

journal-article

Comparing faceted and smoothed tool surface descriptions in sheet metal forming simulation

International Journal of Material Forming

journal-article

Trimming of 3D solid finite element meshes: sheet metal forming tests and applications

Engineering with Computers

journal-article

Trimming of 3D solid finite element meshes: sheet metal forming tests and applications

Engineering with Computers

journal-article

Importance of the coupling between the sign of the mean stress and the third invariant on the rate of void growth and collapse in porous solids with a von Mises matrix

Modelling and Simulation in Materials Science and Engineering

journal-article

Influence of the plastic anisotropy modelling in the reverse deep drawing process simulation

Materials and Design

journal-article

Influence of the plastic anisotropy modelling in the reverse deep drawing process simulation

Materials and Design

journal-article

Influence of the plastic anisotropy modelling in the reverse deep drawing process simulation

Materials and Design

journal-article

Influence of the plastic anisotropy modelling in the reverse deep drawing process simulation

Materials & Design

journal-article

Intervertebral disc creep behavior assessment through an open source finite element solver

Journal of Biomechanics

journal-article

Intervertebral disc creep behavior assessment through an open source finite element solver

Journal of Biomechanics

journal-article

Intervertebral disc creep behavior assessment through an open source finite element solver

Journal of Biomechanics

journal-article

Intervertebral disc creep behavior assessment through an open source finite element solver

Journal of Biomechanics

journal-article

New analytical criterion for porous solids with Tresca matrix

INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME)

journal-article

New analytical criterion for porous solids with Tresca matrix

INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME)

journal-article

Comparing faceted and smoothed tool surface descriptions in sheet metal forming simulation

International Journal of Material Forming

journal-article

Comparing faceted and smoothed tool surface descriptions in sheet metal forming simulation

International Journal of Material Forming

journal-article

Effect of tendon stiffness on the generated force at the Achilles tendon - 3D finite element simulation of a human triceps surae muscle during isometric contraction

Journal of Biomechanical Science and Engineering

journal-article

Effect of tendon stiffness on the generated force at the Achilles tendon - 3D finite element simulation of a human triceps surae muscle during isometric contraction

Journal of Biomechanical Science and Engineering

journal-article

FINITE ELEMENT ANALYSIS OF WRINKLING DURING CUP DRAWING

World Congress on Computational Mechanics; European Conference on Computational Mechanics; European Conference on Computational Fluid Dynamics, Vols Ii - Iv

journal-article

FINITE ELEMENT ANALYSIS OF WRINKLING DURING CUP DRAWING

World Congress on Computational Mechanics; European Conference on Computational Mechanics; European Conference on Computational Fluid Dynamics, Vols Ii - Iv

journal-article

Finite element analysis of wrinkling during cup drawing

11th World Congress on Computational Mechanics, WCCM 2014, 5th European Conference on Computational Mechanics, ECCM 2014 and 6th European Conference on Computational Fluid Dynamics, ECFD 2014

conference-paper

Finite element analysis of wrinkling during cup drawing

conference-paper

Importance of the consideration of the specificities of local plastic deformation on the response of porous solids with Tresca matrix

European Journal of Mechanics, A/Solids

journal-article

Importance of the consideration of the specificities of local plastic deformation on the response of porous solids with Tresca matrix

European Journal of Mechanics, A/Solids

journal-article

Importance of the consideration of the specificities of local plastic deformation on the response of porous solids with Tresca matrix

European Journal of Mechanics, A/Solids

journal-article

Importance of the consideration of the specificities of local plastic deformation on the response of porous solids with Tresca matrix

European Journal of Mechanics - A/Solids

journal-article

Importance of the coupling between the sign of the mean stress and the third invariant on the rate of void growth and collapse in porous solids with a von Mises matrix

Modelling and Simulation in Materials Science and Engineering

journal-article

Importance of the coupling between the sign of the mean stress and the third invariant on the rate of void growth and collapse in porous solids with a von Mises matrix

Modelling and Simulation in Materials Science and Engineering

journal-article

Importance of the coupling between the sign of the mean stress and the third invariant on the rate of void growth and collapse in porous solids with a von Mises matrix

Modelling and Simulation in Materials Science and Engineering

journal-article

Applying Nagata patches to smooth discretized surfaces used in 3D frictional contact problems

Computer Methods in Applied Mechanics and Engineering

journal-article

Applying Nagata patches to smooth discretized surfaces used in 3D frictional contact problems

Computer Methods in Applied Mechanics and Engineering

journal-article

Applying Nagata patches to smooth discretized surfaces used in 3D frictional contact problems

Computer Methods in Applied Mechanics and Engineering

journal-article

On the Influence of the Yield Parameters Identification Procedure in Cylindrical Cups Earing Prediction

conference-paper

Pre-strain effect on springback of 2D draw bending

International Journal of Materials Engineering Innovation

journal-article

Pre-strain effect on springback of 2D draw bending

International Journal of Materials Engineering Innovation

journal-article

Pre-strain effect on springback of 2D draw bending

International Journal of Materials Engineering Innovation

journal-article

Pre-strain effect on springback of 2D draw bending

International Journal of Materials Engineering Innovation

journal-article

Sensitivity analysis of process parameters in the drawing and ironing Processes

Key Engineering Materials

book

Sensitivity analysis of process parameters in the drawing and ironing Processes

Key Engineering Materials

book

Sensitivity analysis of process parameters in the drawing and ironing Processes

book

Sensitivity Analysis of Process Parameters in the Drawing and Ironing Processes

Key Engineering Materials

journal-article

Sensitivity Analysis of Process Parameters in the Drawing and Ironing Processes

Key Engineering Materials

journal-article

Trimming of 3D solid finite element meshes: sheet metal forming tests and applications

Engineering with Computers

journal-article

Validation of an open source finite element biphasic poroelastic model. Application to the intervertebral disc biomechanics

Poromechanics V - Proceedings of the 5th Biot Conference on Poromechanics

conference-paper

Trimming of 3D solid finite element meshes: sheet metal forming tests and applications

Engineering with Computers

journal-article

Validation of an open source finite element biphasic poroelastic model. Application to the intervertebral disc biomechanics

Poromechanics V - Proceedings of the 5th Biot Conference on Poromechanics

conference-paper

Validation of an open source finite element biphasic poroelastic model. Application to the intervertebral disc biomechanics

conference-paper

Validation of an Open Source Finite Element Biphasic Poroelastic Model. Application to the Intervertebral Disc Biomechanics

BIOT Conference on Poromechanics (BIOT)

conference-paper

3D reconstruction of a spinal motion segment from 2D medical images: Objective quantification of the geometric accuracy of the FE mesh generation procedure

3rd Portuguese Bioengineering Meeting, ENBENG 2013 - Book of Proceedings

conference-paper

3D reconstruction of a spinal motion segment from 2D medical images: Objective quantification of the geometric accuracy of the FE mesh generation procedure

3rd Portuguese Bioengineering Meeting, ENBENG 2013 - Book of Proceedings

conference-paper

3D reconstruction of a spinal motion segment from 2D medical images: Objective quantification of the geometric accuracy of the FE mesh generation procedure

conference-paper

3D Reconstruction of a Spinal Motion Segment from 2D Medical Images: Objective Quantification of the Geometric Accuracy of the FE Mesh Generation Procedure

IEEE Portuguese Meeting in Bioengineering (ENBENG)

conference-paper

Applying Nagata Patches in the Description of Smooth Tool Surfaces used in Sheet Metal Forming Simulations

Key Engineering Materials

book

Applying Nagata Patches in the Description of Smooth Tool Surfaces used in Sheet Metal Forming Simulations

Key Engineering Materials

book

Applying Nagata Patches in the Description of Smooth Tool Surfaces used in Sheet Metal Forming Simulations

book

Applying Nagata Patches in the Description of Smooth Tool Surfaces Used in Sheet Metal Forming Simulations

Key Engineering Materials

journal-article

Applying Nagata Patches in the Description of Smooth Tool Surfaces Used in Sheet Metal Forming Simulations

Key Engineering Materials

journal-article

Constituive modelling of the annulus fibrosus: Numerical implementation and numerical analysis

3rd Portuguese Bioengineering Meeting, ENBENG 2013 - Book of Proceedings

conference-paper

Constituive modelling of the annulus fibrosus: Numerical implementation and numerical analysis

3rd Portuguese Bioengineering Meeting, ENBENG 2013 - Book of Proceedings

conference-paper

Constituive modelling of the annulus fibrosus: Numerical implementation and numerical analysis

conference-paper

Constituive Modelling of the Annulus Fibrosus: Numerical Implementation and Numerical Analysis

IEEE 3RD PORTUGUESE MEETING IN BIOENGINEERING (ENBENG)

journal-article

Earing prediction in drawing and ironing processes using an advanced yield criterion

Key Engineering Materials

book

Earing prediction in drawing and ironing processes using an advanced yield criterion

Key Engineering Materials

book

Earing prediction in drawing and ironing processes using an advanced yield criterion

book

Earing Prediction in Drawing and Ironing Processes Using an Advanced Yield Criterion

Key Engineering Materials

journal-article

Earing Prediction in Drawing and Ironing Processes Using an Advanced Yield Criterion

Key Engineering Materials

journal-article

Improving Nagata patch interpolation applied for tool surface description in sheet metal forming simulation

CAD Computer Aided Design

journal-article

Improving Nagata patch interpolation applied for tool surface description in sheet metal forming simulation

CAD Computer Aided Design

journal-article

Improving Nagata patch interpolation applied for tool surface description in sheet metal forming simulation

CAD Computer Aided Design

journal-article

Improving Nagata patch interpolation applied for tool surface description in sheet metal forming simulation

Computer-Aided Design

journal-article

Nagata patch interpolation using surface normal vectors evaluated from the IGES file

Finite Elements in Analysis and Design

journal-article

Nagata patch interpolation using surface normal vectors evaluated from the IGES file

Finite Elements in Analysis and Design

journal-article

Nagata patch interpolation using surface normal vectors evaluated from the IGES file

Finite Elements in Analysis and Design

journal-article

Nagata patch interpolation using surface normal vectors evaluated from the IGES file

Finite Elements in Analysis and Design

journal-article

On the Influence of the Yield Parameters Identification Procedure in Cylindrical Cups Earing Prediction

AIP Conference Proceedings

conference-paper

Cazacu and barlat criterion identification using the cylindrical cup deep drawing test and the coupled artificial neural networks-genetic algorithm method

Key Engineering Materials

book

Cazacu and barlat criterion identification using the cylindrical cup deep drawing test and the coupled artificial neural networks-genetic algorithm method

Key Engineering Materials

book

Cazacu and barlat criterion identification using the cylindrical cup deep drawing test and the coupled artificial neural networks-genetic algorithm method

book

Cazacu and Barlat Criterion Identification Using the Cylindrical Cup Deep Drawing Test and the Coupled Artificial Neural Networks – Genetic Algorithm Method

Key Engineering Materials

journal-article

Cazacu and Barlat Criterion Identification Using the Cylindrical Cup Deep Drawing Test and the Coupled Artificial Neural Networks – Genetic Algorithm Method

Key Engineering Materials

journal-article

THE ROLE OF MEDICAL IMAGING RESOLUTION ON THE 3D FE MESH GENERATION OF ANATOMICAL STRUCTURES

International Conference on Experimental Mechanics

conference-paper

THE ROLE OF MEDICAL IMAGING RESOLUTION ON THE 3D FE MESH GENERATION OF ANATOMICAL STRUCTURES

conference-paper

THE ROLE OF MEDICAL IMAGING RESOLUTION ON THE 3D FE MESH GENERATION OF ANATOMICAL STRUCTURES

Icem15: 15th International Conference on Experimental Mechanics

journal-article

Local bifurcation and instability theory applied to formability analysis

International Journal of Material Forming

journal-article

Local bifurcation and instability theory applied to formability analysis

conference-paper

Local bifurcation and instability theory applied to formability analysis

International Journal of Material Forming

journal-article

Finite element analysis of the amontons-coulomb's model using local and global friction tests

AIP Conference Proceedings

conference-paper

Finite element analysis of the amontons-coulomb's model using local and global friction tests

AIP Conference Proceedings

conference-paper

Finite element analysis of the amontons-coulomb's model using local and global friction tests

conference-paper

Finite Element Analysis of the Amontons-Coulomb's Model using Local and Global Friction Tests

AIP Conference Proceedings

conference-paper

Improving computational performance through HPC techniques: Case study using DD3IMP in-house code

AIP Conference Proceedings

conference-paper

Improving computational performance through HPC techniques: Case study using DD3IMP in-house code

AIP Conference Proceedings

conference-paper

Improving computational performance through HPC techniques: Case study using DD3IMP in-house code

conference-paper

Improving Computational Performance through HPC Techniques: case study using DD3IMP in-house code

AIP Conference Proceedings

conference-paper

Local bifurcation and instability theory applied to formability analysis

International Journal of Material Forming

journal-article

FINITE ELEMENT ANALYSIS OF THE INFLUENCE OF THE RESTRAINING FORCE IN THE DRAW BEND TEST

International Journal of Material Forming

journal-article

Local bifurcation and instability theory applied to formability analysis

AIP Conference Proceedings

conference-paper

Local bifurcation and instability theory applied to formability analysis

AIP Conference Proceedings

conference-paper

Local Bifurcation and Instability Theory Applied to Formability Analysis

NUMIFORM 2010, VOLS 1 AND 2

conference-paper

DD3IMP: A Case study on Improving Computational Performance through HPC Techniques

Ibergrid: 4th Iberian Grid Infrastructure Conference Proceedings

book

DD3IMP: A Case study on Improving Computational Performance through HPC Techniques

IBERGRID: 4TH IBERIAN GRID INFRASTRUCTURE CONFERENCE PROCEEDINGS

journal-article

DD3IMP: A Case study on Improving Computational Performance through HPC Techniques

IBERGRID: 4TH IBERIAN GRID INFRASTRUCTURE CONFERENCE PROCEEDINGS

journal-article

Finite element analysis of the influence of the restraining force in the draw bend test

International Journal of Material Forming

journal-article

Finite element analysis of the influence of the restraining force in the draw bend test

International Journal of Material Forming

journal-article

Finite element analysis of the influence of the restraining force in the draw bend test

International Journal of Material Forming

journal-article

Finite element analysis on the influence of material mechanical properties in local contact conditions

International Journal of Material Forming

journal-article

Finite element analysis on the influence of material mechanical properties in local contact conditions

International Journal of Material Forming

journal-article

Finite element analysis on the influence of material mechanical properties in local contact conditions

International Journal of Material Forming

journal-article

FINITE ELEMENT ANALYSIS ON THE INFLUENCE OF MATERIAL MECHANICAL PROPERTIES IN LOCAL CONTACT CONDITIONS

International Journal of Material Forming

journal-article

Local interpolation for tools surface description

AIP Conference Proceedings

conference-paper

Local interpolation for tools surface description

AIP Conference Proceedings

conference-paper

Local interpolation for tools surface description

conference-paper

Local Interpolation for Tools Surface Description

AIP Conference Proceedings

conference-paper

Numerical study of springback using the split-ring test for an AA5754 aluminum alloy

Finite Elements in Analysis and Design

journal-article

Numerical study of springback using the split-ring test for an AA5754 aluminum alloy

Finite Elements in Analysis and Design

journal-article

Numerical study of springback using the split-ring test for an AA5754 aluminum alloy

Finite Elements in Analysis and Design

journal-article

Numerical study of springback using the split-ring test for an AA5754 aluminum alloy

Finite Elements in Analysis and Design

journal-article

Blank design for deep drawn parts using parametric NURBS surfaces

Journal of Materials Processing Technology

journal-article

Stochastic analysis of a deep drawing process using finite element simulations

International Journal of Material Forming

journal-article

Stochastic analysis of a deep drawing process using finite element simulations

International Journal of Material Forming

journal-article

Stochastic analysis of a deep drawing process using finite element simulations

International Journal of Material Forming

journal-article

STOCHASTIC ANALYSIS OF A DEEP DRAWING PROCESS USING FINITE ELEMENT SIMULATIONS

International Journal of Material Forming

journal-article

Study on springback in deep drawn tailor welded blanks

International Journal of Material Forming

journal-article

Study on springback in deep drawn tailor welded blanks

International Journal of Material Forming

journal-article

Study on springback in deep drawn tailor welded blanks

International Journal of Material Forming

journal-article

STUDY ON SPRINGBACK IN DEEP DRAWN TAILOR WELDED BLANKS

International Journal of Material Forming

journal-article

Blank design for deep drawn parts using parametric NURBS surfaces

Journal of Materials Processing Technology

journal-article

Blank design for deep drawn parts using parametric NURBS surfaces

Journal of Materials Processing Technology

journal-article

Blank design for deep drawn parts using parametric NURBS surfaces

Journal of Materials Processing Technology

journal-article

Numerical study on the influence of initial anisotropy on optimal blank shape

Finite Elements in Analysis and Design

journal-article

Numerical study on the influence of initial anisotropy on optimal blank shape

Finite Elements in Analysis and Design

journal-article

A deformation based blank design method for formed parts

International Journal of Mechanics and Materials in Design

journal-article

A deformation based blank design method for formed parts

International Journal of Mechanics and Materials in Design

journal-article

A deformation based blank design method for formed parts

International Journal of Mechanics and Materials in Design

journal-article

Numerical study on the influence of initial anisotropy on optimal blank shape

Finite Elements in Analysis and Design

journal-article

Numerical study on the influence of initial anisotropy on optimal blank shape

Finite Elements in Analysis and Design

journal-article

Sensitivity study on some parameters in blank design

Materials and Design

journal-article

Sensitivity study on some parameters in blank design

Materials and Design

journal-article

Sensitivity study on some parameters in blank design

Materials and Design

journal-article

Sensitivity study on some parameters in blank design

Materials & Design

journal-article

A deformation based blank design method for formed parts

International Journal of Mechanics and Materials in Design

journal-article

Numerical simulation and analysis on the deep drawing of LPG bottles

Journal of Materials Processing Technology

journal-article

Algorithms and strategies for treatment of large deformation frictional contact in the numerical simulation of deep drawing process

Archives of Computational Methods in Engineering

journal-article

Algorithms and strategies for treatment of large deformation frictional contact in the numerical simulation of deep drawing process

Archives of Computational Methods in Engineering

journal-article

Algorithms and strategies for treatment of large deformation frictional contact in the numerical simulation of deep drawing process

Archives of Computational Methods in Engineering

journal-article

Numerical simulation and analysis on the deep drawing of LPG bottles

Journal of Materials Processing Technology

journal-article

Numerical simulation and analysis on the deep drawing of LPG bottles

Journal of Materials Processing Technology

journal-article

Algorithms and strategies for treatment of large deformation frictional contact in the numerical simulation of deep drawing process

Archives of Computational Methods in Engineering

journal-article

Numerical simulation and analysis on the deep drawing of LPG bottles

Journal of Materials Processing Technology

journal-article

NUMERICAL PREDICTION OF THE STRESS FIELDS IN A BENDING UNBENDING FORMING STAGE USING STAMP3D AND DD3IMP

Steel Research International

journal-article

Study on the influence of work-hardening modeling in springback prediction

International Journal of Plasticity

journal-article

Incremental volumetric remapping method: Analysis and error evaluation

AIP Conference Proceedings

conference-paper

Incremental volumetric remapping method: Analysis and error evaluation

AIP Conference Proceedings

conference-paper

Incremental volumetric remapping method: Analysis and error evaluation

conference-paper

Incremental Volumetric Remapping Method: Analysis and Error Evaluation

AIP Conference Proceedings

conference-paper

Increnmental volumetric remapping method: Analysis and error evaluation

AIP Conference Proceedings

conference-paper

Increnmental volumetric remapping method: Analysis and error evaluation

conference-paper

Influence of anisotropy properties in finite element optimization of blank shape using NURBS surfaces

AIP Conference Proceedings

conference-paper

Influence of anisotropy properties in finite element optimization of blank shape using NURBS surfaces

AIP Conference Proceedings

conference-paper

Influence of anisotropy properties in finite element optimization of blank shape using NURBS surfaces

conference-paper

Influence of anisotropy properties in finite element optimization of blank shape using NURBS surfaces

AIP Conference Proceedings

conference-paper

Influence of anisotropy properties in finite element optimization of blank shape using NURBS surfaces

conference-paper

Influence of drawbeads in deep-drawing of plane-strain channel sections: Experimental and FE analysis

AIP Conference Proceedings

conference-paper

Influence of drawbeads in deep-drawing of plane-strain channel sections: Experimental and FE analysis

AIP Conference Proceedings

conference-paper

Influence of drawbeads in deep-drawing of plane-strain channel sections: Experimental and FE analysis

conference-paper

Influence of drawbeads in deep-drawing of plane-strain channel sections: Experimental and FE analysis

AIP Conference Proceedings

conference-paper

Influence of process parameters on the deep drawing of stainless steel

Finite Elements in Analysis and Design

journal-article

Influence of process parameters on the deep drawing of stainless steel

Finite Elements in Analysis and Design

journal-article

Influence of process parameters on the deep drawing of stainless steel

Finite Elements in Analysis and Design

journal-article

Influence of process parameters on the deep drawing of stainless steel

Finite Elements in Analysis and Design

journal-article

Kinematic hardening: Characterisation, modeling and impact on springback prediction

AIP Conference Proceedings

conference-paper

Kinematic hardening: Characterization, modeling and impact on springback prediction

AIP Conference Proceedings

conference-paper

Kinematic hardening: Characterization, modeling and impact on springback prediction

AIP Conference Proceedings

conference-paper

Kinematic hardening: Characterization, modeling and impact on springback prediction

conference-paper

Kinematic Hardening: Characterization, Modeling and Impact on Springback Prediction

AIP Conference Proceedings

conference-paper

Optimization of the phenomenological constitutive models parameters using genetic algorithms

Advanced Methods in Material Forming: With 264 Figures and 37 Tables

book

Optimization of the phenomenological constitutive models parameters using genetic algorithms

Advanced Methods in Material Forming: With 264 Figures and 37 Tables

book

Optimization of the phenomenological constitutive models parameters using genetic algorithms

book

Kinematic hardening: Characterisation, modeling and impact on springback prediction

conference-paper

Strategy of material parameters identification for non linear mechanical behavior: Sensitivity of FE computation

AIP Conference Proceedings

conference-paper

Strategy of material parameters identification for non linear mechanical behavior: Sensitivity of FE computation

conference-paper

Strategy of material parameters identification for non linear mechanical behavior: Sensitivity of FE computation

AIP Conference Proceedings

journal-article

Study on the influence of the refinement of a 3-D finite element mesh in springback evaluation of plane-strain channel sections

AIP Conference Proceedings

conference-paper

Study on the influence of the refinement of a 3-D finite element mesh in springback evaluation of plane-strain channel sections

AIP Conference Proceedings

conference-paper

Study on the influence of the refinement of a 3-D finite element mesh in springback evaluation of plane-strain channel sections

conference-paper

Study on the influence of the refinement of a 3-D finite element mesh in springback evaluation of plane-strain channel sections

AIP Conference Proceedings

conference-paper

Study on the influence of work-hardening modeling in springback prediction

International Journal of Plasticity

journal-article

Study on the influence of work-hardening modeling in springback prediction

International Journal of Plasticity

journal-article

Study on the influence of work-hardening modeling in springback prediction

International Journal of Plasticity

journal-article

Evolutional friction law in the numerical simulation of the deep drawing of a rail

Materials Science Forum

book

Evolutional friction law in the numerical simulation of the deep drawing of a rail

book

Trimming of 3D solid finite element meshes using parametric surfaces: Application to sheet metal forming

Finite Elements in Analysis and Design

journal-article

Trimming of 3D solid finite element meshes using parametric surfaces: Application to sheet metal forming

Finite Elements in Analysis and Design

journal-article

Trimming of 3D solid finite element meshes using parametric surfaces: Application to sheet metal forming

Finite Elements in Analysis and Design

journal-article

Trimming of 3D solid finite element meshes using parametric surfaces: Application to sheet metal forming

Finite Elements in Analysis and Design

journal-article

Evolutional Friction Law in the Numerical Simulation of the Deep Drawing of a Rail

Materials Science Forum

journal-article

Evolutional Friction Law in the Numerical Simulation of the Deep Drawing of a Rail

Materials Science Forum

journal-article

Evolutional Friction Law in the Numerical Simulation of the Deep Drawing of a Rail

Materials Science Forum

journal-article

Evolutional friction law in the numerical simulation of the deep drawing of a rail

Materials Science Forum

book

Characterizing the plastic anisotropy and its effect on sheet metal forming simulation

Computational Plasticity: Fundamentals and Applications - Proceedings of the 8th International Conference on Computational Plasticity, COMPLAS VIII

conference-paper

Characterizing the plastic anisotropy and its effect on sheet metal forming simulation

conference-paper

Drawbeads: To be or not to be

AIP Conference Proceedings

conference-paper

Modelling of anisotropic work-hardening behaviour of metallic materials subjected to strain-path changes

Computational Materials Science

journal-article

Modelling of anisotropic work-hardening behaviour of metallic materials subjected to strain-path changes

Computational Materials Science

journal-article

Modelling of anisotropic work-hardening behaviour of metallic materials subjected to strain-path changes

Computational Materials Science

journal-article

Modelling of anisotropic work-hardening behaviour of metallic materials subjected to strain-path changes

Computational Materials Science

journal-article

Study on the influence of the work hardening models constitutive parameters identification in the springback prediction

AIP Conference Proceedings

conference-paper

Study on the influence of the work hardening models constitutive parameters identification in the springback prediction

conference-paper

Study on the influence of the work hardening models constitutive parameters identification in the springback prediction

AIP Conference Proceedings

conference-paper

Drawbeads: To be or not to be

AIP Conference Proceedings

conference-paper

Drawbeads: To be or not to be

conference-paper

Drawbeads: To be or not to be

AIP Conference Proceedings

conference-paper

Study on the influence of the work hardening models constitutive parameters identification in the springback prediction

AIP Conference Proceedings

conference-paper

Application of the incremental volumetric remapping method in the simulation of multi-step deep drawing processes

AIP Conference Proceedings

conference-paper

Application of the incremental volumetric remapping method in the simulation of multi-step deep drawing processes

AIP Conference Proceedings

conference-paper

Application of the incremental volumetric remapping method in the simulation of multi-step deep drawing processes

conference-paper

Application of the incremental volumetric remapping method in the simulation of multi-step deep drawing processes

AIP Conference Proceedings

conference-paper

Characterizing the plastic anisotropy and its effect on sheet metal forming simulation

Computational Plasticity: Fundamentals and Applications - Proceedings of the 8th International Conference on Computational Plasticity, COMPLAS VIII

conference-paper

Numerical Analysis on the Effects of the Friction Coefficient on the Deep Drawing of a Rail

Materials Science Forum

journal-article

Springback Evaluation with Several Phenomenological Yield Criteria

Materials Science Forum

journal-article

Springback Evaluation with Several Phenomenological Yield Criteria

Materials Science Forum

journal-article

Springback evaluation with several phenomenological yield criteria

Advanced Materials Forum Ii

book-chapter

Springback evaluation with several phenomenological yield criteria

Materials Science Forum

book

Springback evaluation with several phenomenological yield criteria

Materials Science Forum

book

Work Hardening Models and the Numerical Simulation of the Deep Drawing Process

Materials Science Forum

journal-article

Work Hardening Models and the Numerical Simulation of the Deep Drawing Process

Materials Science Forum

journal-article

Work Hardening Models and the Numerical Simulation of the Deep Drawing Process

Materials Science Forum

journal-article

Work hardening models and the numerical simulation of the deep drawing process

Advanced Materials Forum Ii

book-chapter

Work hardening models and the numerical simulation of the deep drawing process

Materials Science Forum

book

Work hardening models and the numerical simulation of the deep drawing process

Materials Science Forum

book

Work hardening models and the numerical simulation of the deep drawing process

book

Springback evaluation with several phenomenological yield criteria

book

A benchmark for validation of numerical results in sheet metal forming

Journal of Materials Processing Technology

journal-article

A benchmark for validation of numerical results in sheet metal forming

Journal of Materials Processing Technology

journal-article

Numerical Simulation of the Deep Drawing Process: Modelling the Blank Holder

conference-paper

A benchmark for validation of numerical results in sheet metal forming

Journal of Materials Processing Technology

journal-article

A benchmark for validation of numerical results in sheet metal forming

Journal of Materials Processing Technology

journal-article

An advanced constitutive model in the sheet metal forming simulation: the Teodosiu microstructural model and the Cazacu Barlat yield criterion

AIP Conference Proceedings

conference-paper

An advanced constitutive model in the sheet metal forming simulation: the Teodosiu microstructural model and the Cazacu Barlat yield criterion

conference-paper

Numerical Analysis on the Effects of the Friction Coefficient on the Deep Drawing of a Rail

Materials Science Forum

journal-article

Numerical Analysis on the Effects of the Friction Coefficient on the Deep Drawing of a Rail

Materials Science Forum

journal-article

Numerical Simulation of the Deep Drawing Process: Modelling the Blank Holder

AIP Conference Proceedings

conference-paper

Numerical analysis on the effects of the friction coefficient on the deep drawing of a rail

Advanced Materials Forum Ii

book-chapter

Numerical analysis on the effects of the friction coefficient on the deep drawing of a rail

Materials Science Forum

book

Numerical analysis on the effects of the friction coefficient on the deep drawing of a rail

Materials Science Forum

book

Numerical analysis on the effects of the friction coefficient on the deep drawing of a rail

book

Springback Evaluation with Several Phenomenological Yield Criteria

Materials Science Forum

journal-article

Improvement of a frictional contact algorithm for strongly curved contact problems

International Journal for Numerical Methods in Engineering

journal-article

Improvement of a frictional contact algorithm for strongly curved contact problems

International Journal for Numerical Methods in Engineering

journal-article

Improvement of a frictional contact algorithm for strongly curved contact problems

International Journal for Numerical Methods in Engineering

journal-article

Improvement of a frictional contact algorithm for strongly curved contact problems

International Journal for Numerical Methods in Engineering

journal-article

Comparison of experimental and simulated results for a mild steel and a dual-phase steel deformed under tension and deep-drawing

book

Comparison of Experimental and Simulated Results for a Mild Steel and a Dual-Phase Steel Deformed under Tension and Deep-Drawing

Key Engineering Materials

journal-article

Comparison of experimental and simulated results for a mild steel and a dual-phase steel deformed under tension and deep-drawing

Key Engineering Materials

book

Comparison of Experimental and Simulated Results for a Mild Steel and a Dual-Phase Steel Deformed under Tension and Deep-Drawing

Key Engineering Materials

journal-article

Comparison of experimental and simulated results for a mild steel and a dual-phase steel deformed under tension and deep-drawing

Key Engineering Materials

book

Comparison of experimental and simulated results for a mild steel and a dual-phase steel deformed under tension and deep-drawing

Advanced Materials Forum I

book-chapter

Application of tri-linear and tri-quadratic 3-D solid finite elements in sheet metal forming process simulations

Simulation of Materials Processing: Theory, Methods and Applications

journal-article

Application of tri-linear and tri-quadratic 3-D solid finite elements in sheet metal forming process simulations

Simulation of Materials Processing: Theory, Methods and Applications

journal-article

Electronic Structure of 3d Transition-Atom Impurities in Zinc Selenide

Materials Science Forum

journal-article